-40%

Folded Steel Qing Dynasty Chinese Sword Ox-Tailed Dao Rose Wood Phoenix Fittings

$ 59.24

Availability: 48 in stock
  • Handedness: Double-Handed
  • Item must be returned within: 30 Days
  • Handle Material: Wood
  • Country/Region of Manufacture: China
  • Blade Material: Damascus Steel
  • Refund will be given as: Money Back
  • Color: Red
  • Brand: SJ SHI JIAN
  • Condition: New
  • Type: Dao
  • Dexterity: Ambidextrous
  • All returns accepted: Returns Accepted
  • Edge: Single
  • Original/Reproduction: Original
  • Style: Chinese
  • Return shipping will be paid by: Buyer

    Description

    Store category
    Sign Up Now !
    You may also like
    Folded Steel Qing Dynasty Chinese Sword Ox-Tailed Dao Rose Wood Phoenix Fittings
    Product Description
    GENERAL DATA
    OVERALL LENGTH: 78 cm / 31''
    BLADE LENGTH: 50 cm / 20''
    HANDLE LENGTH: 17 cm / 6.7''
    BLADE WIDTH: 3.7 cm / 1.46''
    BLADE THICKNESS: 0.8 cm / 0.3''
    BLADE HRC: 55
    BLADE CRAFT
    BLADE CRAFT: folded forged by 11 times(2048 layers), water quenching
    BLADE MATERIAL: carbon steel
    BLADE SHAPE: Ox-Tailed Dao
    HAMON: natural riffle hamon, caused by folding process
    Bo-hi: double groove
    SHARPNESS:★★★★☆
    MIRROR EFFECT: ★★★☆☆
    MOUNTINGS
    HANDLE: rose wood
    SCABBARD: rose wood
    OTHER FITTINGS: alloy
    PACKAGE
    1 sword with scabbard
    1 black cotton bag
    NOTICE
    Sword display holder(stand) is not included
    Manual measurement error range 1-2 cm
    Folded Steel
    This means that the carbon steel is folded by 11 times to produce 2048 layers. The higher quantity of layers provides more unique and mystical hada patterns, which defines and displays the craftsman’s experience and knowledge of traditional metallurgy passed down from generation to generation. Only the utmost skilled bladesmiths (Toushyo) and polishers (Togi-shi) can bring out the beauty and life from the Shinsakuto live blade. During the forging process, all of the slags and impurities of the steel are burned off and folded forged to an uncompromised strength with an sharp cutting edge. The final carbon content is 1% and the hardness is an impressive HRC 55°on the Rockwell Scale. This high quality blade can easily cut through tatami straw mats or bamboo for Tameshigiri or Batto-do use.
    Dao
    are single-edged
    Chinese swords
    , primarily used for slashing and chopping. The most common form is also known as the Chinese sabre, although those with wider blades are sometimes referred to as Chinese broadswords.
    The
    Ox-Tailed Sword
    (Chinese:
    牛尾刀
    ) was a type of Chinese saber (dao) of the late Qing Dynasty period. A heavy bladed weapon with a characteristic flaring tip, it was primarily a civilian weapon.
    ENGRAVING SERVICE
    HOW TO DISASSEMBLE A JP SWORD
    SWORD MAKING PROCESSES
    DELIVERY DETAILS
    PAYMENT
    ENGRAVING SERVICE
    It is
    free
    for engraving English words,Chinese characters and Japanese Kanji.
    You need pay
    additional
    for engraving patterns (dragon, lion, etc.) or other logos.
    HOW TO DISASSEMBLE A JP SWORD
    SWORD MAKING PROCESSES
    Forming
    Swords can be shaped by a variety of metalworking techniques.The primary techniques are forging and stock removal.
    Forging uses heat to bring the material to a malleable state. The material is then hammered to shape, typically using hammer and anvil together with specialized set and fuller tools depending on the particular technique.
    Stock removal shapes the sword from prepared stock that is larger in all dimensions than the finished sword by filing, grinding and cutting.
    Quenching
    After the blade has been shaped, the sword would be quenched. We quench our swords in either water or oil. Water quenching produces a tougher edge which can also be hardened further more using clay. Blades quenched in oil are still considerably hardened and do have superior flexibility compared to a water quenched blade.
    The more rapidly a blade cools down, the harder it becomes. Thus, when a hot blade enters the water, the water also gains heat and the blade will cool more gradually. Therefore, the first part of the blade that enters the water will be the hardest. Therefore, the technique of quenching was also very important. If a blade has any flaws from forging (air bubbles, ash), it will break immediately during the quenching process.
    Tempering
    After quenching, the sword will be quite tough and brittle, with little flexibility. To overcome this, the blade would undergo a tempering process. The blade would be reheated to a certain temperature degree then allowed to cool naturally. The blade would be slightly less tough afterward but have a greater degree of flexibility – the art would be to perfectly balance the blade for toughness, sharpness and flexibility.
    Modifying Shape
    Finishing
    Finishing encompasses polishing, decorating, and crafting and assembling the hilt, guard and sheath.
    The swordsmith would be most concerned with the state of the blade itself and possibly decorating the blade and preparing the guards and pommel. Other artisans would likely be involved in the work of fashioning the hilt, sheath and other furniture; and in any fine decoration.
    Polishing
    When the rough blade is completed, the swordsmith turns the blade over to a polisher, whose job it is to refine the shape of a blade and improve its aesthetic value. The polishing process almost always takes longer than even crafting, and a good polish can greatly improve the beauty of a blade, while a bad one can ruin the best of blades. Early polishers used three types of stone, whereas a modern polisher generally uses seven.On high quality blades, only the back of the blade and the adjacent sides, are polished to a mirror-like surface. To bring out the grain and hamon, the center portion of the blade, and the edge are usually given a matte finish. Microscopic scratches in the surface vary, depending on hardness. Smaller but more numerous scratches in the harder areas reflect light differently from the deeper, longer scratches in the softer areas. The harder metal appears more matte than the softer, and the manner in which it scatters light is less affected by the direction of the lighting.
    After the blade is finished it is passed on to a mountings-maker for fashioning the hilt, sheath and other mountings.
    DELIVERY DETAILS
    International Buyers – Please Note:
    a) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
    b) Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
    The shipment will be prepared and get shipment as soon as possible when you place the order. The shipping time is different according to the different area.
    US:
    10-15 days
    AU:
    8-12 days
    Ca:
    10-15 days
    Others:
    25-60 days
    It is international shipment, so there are many factors influenced, please let us know if there is any question, we will try our best to make things right for you.
    PAYMENT
    Only paypal accepted. Paypal is convenient and safe for both of us.
    If there is any problem with the payment,you can contact with us at any time.
    Feedback